434
Access key fob – if access key fob does not operate properly
& Locking and unlocking |
|
|
|
S09AP01 |
|
|
& Switching power status
S09AP02
1 . Apply the parking brake .
2 . Shift the select lever to the “ P ” ( Park ) position .
3 . Depress the brake pedal .
|
5 . When the keyless access with pushbutton start system is deactivated , press the push-button ignition switch with the brake pedal released . The status of the push-button ignition switch then changes to “ ON ”. |
1 Release button 2 Emergency key
While pressing the release button of the access key fob , take out the emergency key .
Lock or unlock the driver ’ s door with the emergency key in the procedure described in “ Locking and unlocking from the outside ” FP132 .
NOTE
After locking or unlocking , be sure to attach the emergency key back to the access key fob .
4 . Hold the access key fob with the buttons facing you , and touch the push-button ignition switch with it . When the communication between the access key fob and the vehicle is completed , a chime ( ding ) will sound . At the same time , the status of the push-button ignition switch changes to either of the following . . When the keyless access with pushbutton start system is deactivated : “ ACC ”
. Under other conditions : “ ON ”
NOTE
If the power does not switch even though the above procedure was followed precisely , contact your SUBARU dealer .
& Starting engine
S09AP03
1 . Apply the parking brake .
2 . Shift the select lever to the “ P ” ( Park ) position .
3 . Depress the brake pedal .