372
Reverse Automatic Braking ( RAB ) system
– When the Reverse Automatic Braking ( RAB ) system stops temporarily .
. The message / warning message will not display for approximately 8 seconds after turning the ignition switch to the “ ON ” position .
& Canceling the Reverse Automatic Braking ( RAB ) system operation
S07BN04
The Reverse Automatic Braking ( RAB ) system can be temporarily canceled by any of the following operations .
. Depressing the brake pedal * . Depressing the accelerator pedal *
. The accelerator pedal is kept depressed . ( In this case , limited acceleration will be canceled and the vehicle will continue reversing .)
. The select lever is shifted to a position other than the “ R ” position .
*: While the vehicle is stopped by the automatic braking
NOTE
The system will be canceled if the object is no longer detected .
& Reverse Automatic Braking ( RAB ) system ON / OFF setting
S07BN05
While the select lever is shifted to the “ R ” position , the below functions of the Reverse Automatic Braking ( RAB ) system can be set by operating the audio / navigation monitor .
1 ON setting key of Reverse Automatic Braking ( RAB ) system
2 OFF setting key of Reverse Automatic Braking ( RAB ) system
3 ON setting key of the object detection warning beeping sound
4 OFF setting key of the object detection warning beeping sound
When the ON setting key is shown , the corresponding setting is ON .
Touch and hold the ON setting key to turn the setting OFF .
When the OFF setting is shown , the corresponding setting is OFF .
Touch and hold the OFF setting key to turn the setting ON .
When the Reverse Automatic Braking ( RAB ) system is turned OFF , the following indicator will illuminate .
RAB OFF indicator : illuminates when the Reverse Automatic Braking ( RAB ) system is turned OFF .
RAB OFF indicator will turn off when the Reverse Automatic Braking ( RAB ) system is turned ON .