Pre-Collision Braking System
� Continued from previous page
• The boundaries of your lane are difficult to determine with the stereo camera . ( For example , there are no lane markings ( white lines , etc .), or the lane markings are difficult to see because they are faint , thin or similar in color to the road .)
• A vehicle is approaching from the front in the neighboring lane .
• There is not enough space to avoid a collision within your lane .
• The area around your rear bumper is dirty , or it has frost , mud , etc . on it .
• Your rear bumper is scratched , dented , misaligned , etc .
• You are driving on a snowy road , or the road has puddles or is wet , and your vehicle or nearby vehicles are kicking up water , snow , etc . from the road .
• Never attempt to test the operation of Automatic Emergency Steering . - Your vehicle may not stop , or the system may not activate , which can lead to an unintended collision .
• The system may not operate correctly under the conditions listed below . When these conditions occur , turn off Automatic Emergency Steering .
� Page 61 - The tire pressure is not correct .* 1 - Tires that are unevenly worn or tires with uneven wear patterns are installed .* 1 - Tires that are the wrong size are installed .* 1 - The wheels are out of balance ( e . g ., the balance weight is removed or misaligned ).* 1 - The wheels are out of alignment .* 1 - There is an abnormal vibration in the steering wheel or the steering wheel is heavier than usual . - The steering wheel has been replaced with parts other than genuine
SUBARU parts . - A trailer or another vehicle , etc . is being towed . - A flat tire has been fixed temporarily with a tire repair kit . - The suspension has been modified ( including a genuine SUBARU suspension that has been modified ).
52