Replacing bulbs
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.
replace it.
4. Install the bulb socket by turning it
clockwise.
5. Route the wire as shown in the
illustration.
483
& License plate light
S11BE07
2. Turn the bulb socket counterclockwise
and remove it.
6. Install the light cover on the rear gate.
3. Pull the bulb out of the bulb socket and
2. Turn the bulb socket counterclockwise
– CONTINUED –
1. The license plate lights must be
pushed outwards, and then pulled out to
be removed.