482
Replacing bulbs
8. Pull the bulb out of the bulb socket and
replace it.
9. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
10. Reconnect the electrical connector.
6. Slide the rear combination light as-
sembly rearward to remove it from the
vehicle.
12. Tighten the screws.
13. Put the covers back in place.
& Backup light
S11BE36
11. Put the rear combination light assem-
bly into place while aligning the 2 pins with
the holes and secure to the vehicle.
7. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
1. Apply a flat-head screwdriver to the