480
Replacing bulbs
& Front side marker light (if
equipped)
S11BE24
Right-hand side
1. Use a screwdriver to remove the clips
on the air intake duct, then remove the
duct.
Left-hand side
2. Use a screwdriver to remove the
secured clip of the washer tank. To make
it easy to access the bulb, turn the neck of
the washer fluid filler pipe as illustrated.
3. Remove the bulb from the headlight
assembly by turning it counterclockwise.
4. Replace the bulb with a new one. At
this time, use care not to touch the bulb
surface.
5. To install the bulb to the headlight
assembly, turn it clockwise until it clicks.
6. Install the air intake duct with clips
(right-hand side).
7. Set the washer tank to the original
place and secure it with a clip (left-hand
side).