Seats
the right and left side mirror/front
passenger’s side mirror operation can
be changed by a SUBARU dealer.
Contact your SUBARU dealer for de-
tails.
. The system stores the adjusted
mirror angle for approximately 45 sec-
onds after the ignition switch is turned
to the “OFF” position. Register the
mirror angle while the memory function
is available.
S01AQ060303
WARNING
Be sure to press the correct button
to retrieve your registered seat posi-
tion. If the seat position is not
optimum for you, it may adversely
affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
involving serious injury or death.
gistered seat position may occur.
! Retrieval of the seat position
registered with access key fob
S01AQ060304
1. Hold the registered access key fob.
1. Turn the ignition switch to the “ON”
position.
2. Put the select lever is in the “P” position
and apply the parking brake, then press
button “1” or “2”.
A chirp will sound and the seat and outside
mirror move to the registered position.
When the select lever is moved to the “R”
position, the outside mirror will move to the
registered reverse tilt-down position.
NOTE
. If a new position is registered to the
same button, the previously registered
seat position data will be deleted.
. If the vehicle battery is removed, the
registered seat position data will not be
deleted. However, deviation of the re-
2. Unlock the driver’s door by pressing
the “ ” button or touching the sensor
behind the door handle.
3. Open the driver’s door.
A chirp will sound and the seat and angle
of the outside mirrors moves to the
registered position.
When the select lever is moved to the “R”
position, the outside mirror will move to the
registered reverse tilt-down position.
– CONTINUED –
! Retrieval of seat position regis-
tered with button “1” or “2”
39