250
Defogger and deicer
To adjust the reverse tilt-down mirror
angle, adjust the outside mirror using the
remote control mirror switch while the
reverse tilt-down operates. For details
about how to adjust the outside mirror
angle, refer to “Remote control mirror
switch” FP249.
Memory function:
The angle of the reverse tilt-down mirror
can be registered. Register the position
with button “1”, “2” or each of the access
key fobs and retrieve the position.
For details about registration or retrieval of
a position, refer to “Memory function
(driver’s seat – if equipped)” FP37.
NOTE
. The factory setting (default setting)
for this function is set as “non-opera-
tional”. This setting can be changed to
“operational” at SUBARU dealers. For
more details, contact a SUBARU dealer.
. If the hold last position function
setting is “non-operation”, the reverse
tilt-down will move to the factory de-
fault position.
3-18. Defogger and deicer (if
equipped)
S03BI
NOTE
If the seat is moved forward or back-
ward 1.18 in (30 mm) or more, the
reverse tilt-down will move to the
factory default position or the last
position hold.
Hold last position function:
The angle of the reverse tilt-down mirror
can be set to the latest adjusted angle.
The hold last position function operates
when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward
1.18 in (30 mm) or more.
1)
2)
3)
Rear window defogger
Outside mirror defogger (if equipped)
Windshield wiper deicer (if equipped)