Mirrors
! Remote control mirror switch
S03AP0302
The mirrors can also be adjusted manu-
ally.
For models with memory function:
. The outside mirror can be adjusted
for approximately 45 seconds after the
following conditions are met.
– The ignition switch is turned to
the “OFF” position.
– The door is unlocked using the
access key fob.
. The outside mirror angle can be
registered with button “1”, “2” or each
of the key fobs.
For details, refer to “Memory function
(driver’s seat – if equipped)” FP37.
! Reverse tilt-down feature (if
equipped)
S03AP030201
When backing up the vehicle, the front
passenger’s side outside mirrors will turn
downward automatically to provide better
rear visibility.
1. Push the ignition switch to the ON
position.
2. Move the shift lever to the R (Reverse)
position.
3. The outside mirror surface moves
downward.
The outside mirror surface will return to its
original position when the following condi-
tion are met.
. After approximately 9 seconds from the
shift lever is moved to any position other
than R (Reverse).
. The ignition switch is turned to the
“OFF” position.
. The vehicle is running.
NOTE
. The reverse tilt-down mirror angle
can be registered with button “1”, “2”
or each of the key fobs. For details,
refer to “Memory function (driver’s seat
– if equipped)” FP37.
. The operational/non-operational
setting can be changed by operating
the combination meter display (color
LCD). For details, refer to “Vehicle
Setting” FP196.
. The factory setting (default setting)
for this function is set as the front
passenger’s side mirror. The setting of
the right and left side mirror/front
passenger’s side mirror operation can
be changed by a SUBARU dealer.
Contact your SUBARU dealer for de-
tails.
CAUTION
Depress the brake pedal during the
reverse tilt-down mirror angle ad-
justment.
– CONTINUED –
: Select side to adjust
: Direction control
The remote control mirrors operate only
when the ignition switch is in the “ON” or
“ACC” position.
1. Turn the control switch to the side that
you want to adjust. “L” is for the left mirror,
“R” is for the right mirror.
2. Move the control switch in the direction
you want to move the mirror.
3. Return the control switch to the neutral
position to prevent unintentional opera-
tion.
NOTE
249