110
Keyless access with push-button start system
2-2. Keyless access with
push-button start system (if
equipped)
S02AP
The following access key fobs are pro-
vided with the vehicle.
1)
2)
3)
Access key fob (main)
Access key fob (sub)
Key number plate
The “keyless access with push-button start
system” allows the following functions to
be performed when the access key fob is
being carried.
. Locking and unlocking of doors, rear
gate and fuel lid (For details, refer to
“Locking and unlocking by holding the
access key fob” FP114.)
. Starting and stopping the engine (For
details, refer to “Starting and stopping
engine (models with push-button start
system)” FP301.)
. Arming and disarming the alarm sys-
tem (For details, refer to “Alarm system”
FP134.)
NOTE
. Locking/unlocking using the remote
keyless entry system can also be con-
trolled with the buttons on the access
key fob. For details, refer to “Remote
keyless entry system” FP127.
. Carefully store the key number plate
supplied with the access key fob. It is
necessary for vehicle repair and addi-
tional registration of access key fobs.
For details, refer to “Key replacement”
FP125.
An emergency key is attached to each
access key fob.
1)
2)
Release button
Emergency key
Press the release button of the access key
fob to take out the emergency key.
The emergency key is used for the follow-
ing operations.
. Locking and unlocking the driver’s door
. Locking and unlocking the glove box
NOTE
The glove box can be kept locked when
the vehicle and the access key fob (with
the emergency key removed) are left at
a parking facility.