Keys
2-1. Keys
. Glove box & Key number plate
The valet key fits only the ignition switch
and door locks. You can keep the glove
box locked when you leave your vehicle
and valet key at a parking facility. The key number is stamped on the key
number plate attached to the key set. Write
down the key number and keep it in
another safe place, not in the vehicle. This
number is needed to make a replacement
key if you lose your key or lock it inside the
vehicle. Refer to “Key replacement”
FP125.
S02AA01
S02AA
NOTE
NOTE
Locking/unlocking using the remote
keyless entry system can also be con-
trolled with the buttons on the key. For
details, refer to “Remote keyless entry
system” FP127.
CAUTION
Do not attach a large key holder or
key case to either key. If it bangs
against your knees while you are
driving, it could turn the ignition
switch from the “ON” position to
the “ACC” or “LOCK” position,
thereby stopping the engine.
Master key
Submaster key
Valet key
Key number plate
A key can be used in the following
locations.
. Ignition switch
. Driver’s door
For models with “keyless access with
push-button start system”, refer to
“Keyless access with push-button start
system” FP110.
The following keys are provided with the
vehicle.
1)
2)
3)
4)
109