Instruments and controls/Information display (Mexico–spec. models)
& Outside temperature indica-
tor
! Road surface freeze warning indi-
cation
3-35
NOTE
The outside temperature indication
may differ from the actual outside
temperature. The road surface freeze
warning indication should be treated
only as a guide. Be sure to check the
condition of the road surface before
driving.
& Driving information display
This indicator displays the outside tem-
perature between −408F (−408C) and
1228F (508C).
NOTE
The indicator may give an inaccurate
reading under any of the following
conditions:
. When the sensor is exposed to
direct sun light.
. When idling, when running at low
speeds in a traffic jam, or when the
engine is restarted immediately after a
shut-down.
. When the actual outside tempera-
ture falls outside the specified indicator
range.
When the outside temperature drops to
378F (38C) or lower, the temperature
indication flashes to show that the road
surface may be frozen.
If the outside temperature drops to 378F
(38C) or lower while the display is giving
an indication other than the outside
temperature, the display switches to the
outside temperature indication and flashes
for 5 seconds before returning to its
original indication.
If the display is already indicating an
outside temperature of 378F (38C) or lower
when the ignition switch is turned to the
“ON” position, the indication does not
flash.
For type A combination meter
1) Information display selection knob
With the ignition switch in the “ON”
position, each successive press of the
information display selection knob
switches the display in the following
sequence.
– CONTINUED –