Starting and operating/Reverse Automatic Braking System
select lever is shifted to “R” position.
& RAB warning indicator
& Handling of the sonar sensors
The 4 sonar sensors are located in the
rear bumper. To ensure the proper operation of the Reverse Automatic Braking
system, observe the following precautions.
7-73
malfunction may occur, including inability
to detect objects in the reversing direction.
If any strong impact is applied to the rear
bumper, contact a SUBARU dealer to
have the system inspected.
. Do not disassemble the sonar sensors.
NOTE
If the sonar sensors require repair or
replacement, or if the area of the rear
bumper near the sonar sensors requires repair, paintwork or replacement, contact your SUBARU dealer
for assistance.
If the Reverse Automatic Braking System
malfunctions, the above indicator illuminates in the combination meter. Contact
the nearest SUBARU dealer for details.
. Do not affix any stickers or other items
on the bumper surface near the sonar
sensors.
. Always keep the rear bumper surface
near the sonar sensors clean.
. Do not modify the rear bumper.
. Do not paint the bumper near the sonar
sensors.
. Do not apply strong impacts to the rear
bumper near the sonar sensors. If a
sensor becomes misaligned, a system