2-18
Keys and doors/Keyless access with push–button start system
! By operating the driver’s door
A chirp sound will be heard, and the
function will be disabled.
1. Sit in the driver’s seat, and close the
door.
side) of the power door locking switch
twice while the door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver’s
door once.
8. Within 5 seconds after step 7 is
performed, close the door. A chirp sound
will be heard, and the functions will be
disabled.
dure in which the keyless access
function was disabled.
– When disabling by operating the
driver’s door: a chirp will not be
heard
– When disabling by operating the
access key: a chirp will be heard
NOTE
Refer to “Access key – if access key does
not operate properly” F9-17.
In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.
2. Push the rear side (unlock side) of the
power door locking switch.
3. Within 5 seconds after step 2 is
performed, open the driver’s door.
4. Within 5 seconds after step 3 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver’s
door twice.
6. Within 10 seconds after step 5 is
performed, push the rear side (unlock
! Enabling functions
When the procedure to disable the functions is performed again, the functions are
enabled.
NOTE
. The keyless access function will be
enabled only if you perform the procedure in the same manner that you
disabled the function (for example,
when disabling by operating the driver’s door, the function will not be
enabled even if you operate the access
key).
. Press the push-button ignition
switch if you do not know the proce-
& When access key does not
operate properly
& Replacing battery of access
key
Refer to “Replacing battery of access key”
F11-45.
& Replacing access key
Access keys can be replaced at SUBARU
dealers. For more details, contact a
SUBARU dealer.