Keys and doors/Keyless access with push–button start system
& Disabling keyless access
function
WARNING
If you wear an implanted pacemaker
or an implanted defibrillator, perform the procedure described in
“By operating the driver’s door”
F2-18 to disable the keyless access
function. If you perform the procedure described in “By operating the
access key” F2-17, the operation of
an implanted pacemaker or implanted defibrillator may be affected
by the radio waves from the transmitter antenna.
When the vehicle is not going to be used
for a long time, or when you choose not to
use the keyless access function, the
keyless access function can be disabled.
2-17
dure described in “Starting engine”
F9-18.
. We recommend that you disable the
keyless access functions under the
following conditions.
– When the vehicle is not going to
be used for an extended period of
time
– When the keyless access functions are not going to be used
! Disabling functions
! By operating the access key
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key. For details about registering a PIN
code, refer to “Registering a PIN code”
F2-20.
1. Open the driver’s door.
2. Rotate the lock lever forward.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. The setting can also be changed at
SUBARU dealers. For more details,
contact a SUBARU dealer.
. To start the engine while the functions are disabled, perform the proce-
3. Press and hold the “ ” button and
“ ” button on the access key simultaneously for more than 5 seconds.
– CONTINUED –