Keys and doors/Keyless access with push–button start system
2-17
following conditions.
– When the vehicle is not going to
be used for an extended period of
time
– When the keyless access functions are not going to be used
! Disabling functions
! By operating the access key
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key. For details about registering a PIN
code, refer to “Registering a PIN code”
F2-19.
1. Open the driver’s door.
3. Press and hold the “ ” button and
“ ” button on the access key simultaneously for more than 5 seconds.
! By operating the driver’s door
A chirp sound will be heard, and the
function will be disabled.
1. Sit in the driver’s seat, and close the
door.
2. Rotate the lock lever forward.
2. Push the rear side (unlock side) of the
power door locking switch.
3. Within 5 seconds after step 2 is
performed, open the driver’s door.
4. Within 5 seconds after step 3 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver’s
door twice.
6. Within 10 seconds after step 5 is
performed, push the rear side (unlock
side) of the power door locking switch
twice while the door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver’s
door once.
– CONTINUED –