Subaru Forester Manuals 2010 Forester Owner’s Manual | Page 350

11-50 Maintenance and service surface. 5. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 6. Reconnect the electrical connector. 7. Install the air intake duct with clips (right-hand side). & Front turn signal light It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. & Rear combination lights & Position light 2. Slide the rear combination light assembly rearward and remove it from the vehicle. 1. Turn the bulb socket counterclockwise and pull out the socket. 2. Pull the bulb out of the socket. Install a new bulb. 3. Install the bulb socket by turning it clockwise. 1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly. 1) 2) 3) Brake/tail light Rear turn signal light Back-up light