48
Seatbelts
buckle on the right-hand side until a click is heard.. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly.
. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again.
4. Make sure that the“” mark on the anchor tongue plate and the“” mark on the anchor buckle face outwards.
7. To make the lap part tight, pull up on the shoulder belt. And place the lap belt as low as possible on your hips, not on your waist.
6. Insert the center seatbelt tongue plate into the center seatbelt buckle until it clicks.
5. After confirming that the webbing is not twisted, insert the anchor tongue plate attached at the webbing end into the