Seatbelts 47 |
||||||||
|
tongue plate not fastened to the anchor buckle on the right-hand side), it cannot properly restrain the wearer in position in an accident, possibly resulting in serious injury or death.
. Before fastening the seatbelt, confirm that the seatbelt is routed through the center seat belt guide. A seatbelt not routed through the center seat belt guide can cause neck injuries during sudden braking or in a collision, since it may slip up on the neck.
The rear center seatbelt is stowed in the seatbelt holder on the right side of the cargo area.
|
tended position. Do not remove the head restraint. |
Center seat belt guide
3. After drawing out the seatbelt, pass it through the center seat belt guide as follows: First insert one edge of the belt into the open gap in the belt guide; then slide the rest of the belt in, so that the whole belt fits inside.
|
1
Seat, Seatbelt and SRS Airbags
|
|||||
1. Raise the head restraint to the ex- |
2. Remove the center seatbelt tongue plate, and then slide the webbing to remove the seatbelt from the belt holder and pull out the seatbelt slowly. |
|||||||
– CONTINUED – |