496
Replacing Bulbs
2. Turn the bulb socket counterclockwise and remove it.
& License Plate Light s11be07
1. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch. Apply a flat-head screwdriver to the light cover as shown in the illustration, and pry the light cover off from the rear gate trim.
3. Pull the bulb out of the bulb socket and replace it with a new one.
4. Install the bulb socket by turning it clockwise.
5. Install the light cover on the rear gate.
1. License plate light must be pushed inwards, then pulled out to be removed.