250
Mirrors
. For security reasons, when transferring ownership of your vehicle, it is recommended to delete the programmed HomeLink ® buttons. Refer to“ Erasing HomeLink ® buttons” FP252.
! Programming a New HomeLink ® button s03ap070409
1 Indicator Light 2 HomeLink ® buttons
1. Press and release the HomeLink ® button that you would like to program. The HomeLink ® indicator light will flash orange slowly( if not, refer to“ Erasing HomeLink ® buttons” FP252).
1 Garage door opener remote
2. Position the hand-held remote( garage door opener remote) 1 to 3 inches( 2 to 8 cm) away from the HomeLink ® button that you would like to program.
NOTE
Some hand-held remotes( garage door opener remotes) may actually train better at a distance of 6 to 12 inches( 15 to 30 cm). Keep this in mind if you have difficulty with the programming process.
3. While the HomeLink ® indicator light is flashing orange, press and hold the hand-held remote button. Continue pressing the hand-held remote button until the HomeLink ® indicator light changes from orange to green. You may now release the hand-held remote button.
NOTE
Some devices may require you to replace this“ Programming a New HomeLink ® button” step 3 with procedures noted in the“ Gate Operator / Canadian Programming” section. Refer to“ Gate Operator / Canadian Programming” FP252.