Mirrors 247 |
||||||||
|
3-18. Mirrors
s03ap
Always check that the inside and outside mirrors are properly adjusted before you start driving.
& Inside Mirror( without Auto- Dimming Function)( If Equipped) s03ap08
1 Normal position 2 Anti-glare position
Push the tab on the mirror for normal use. To reduce glare from the headlights of the vehicle behind you, pull the tab to the antiglare position.
|
& Auto-Dimming Mirror / Compass( If Equipped) s03ap12 |
1 Compass 2 Switch
During nighttime driving, the auto-dimming feature senses distracting glare from vehicle headlights behind you and automatically dims to eliminate the glare and preserve your vision.
! To Operate the Auto-Dimming Feature s03ap1201
Press the“” switch to turn the autodimming feature on / off. The auto-dimming feature is enabled when the switch’ s green LED indicator is on. The auto-dimming feature will default to on with each ignition cycle.
|
! To Operate the Compass Feature s03ap1202
1. To turn the compass feature on / off, press and hold the“” switch for more than 3 seconds or until the display turns on / off. The compass feature will default to on with each ignition cycle.
2. If the display reads“ C”, slowly drive the vehicle in circles until compass is calibrated.
Compass calibration zones
3. To adjust for compass zone variance:( 1) Find your current location and zone number on the map.
( 2) Press and hold the“” switch for more than 6 seconds or until a zone number appears in the display.
|
3
Instruments and Controls
|
||||
– CONTINUED – |