154
Warning and Indicator Lights
“ Brightness Dial ” is off .
Operational item
Combination meter
Control dial Available
“ Brightness ” on the center information display
Not available
Center information display
Not available
Available
* 1 : When “ Brightness Dial ” is on , “ Brightness ” on the center information display is not available . For details about “ Brightness Dial ” on / off settings , refer to “ General settings ” FP197 ( 11.6-inch display models ) or “ General settings ” FP214 ( dual 7.0- inch display models ).
& Auto Dimmer Cancel Function s03aj01
When the ambient light is bright , the illumination brightness is set to the maximum regardless of the position of the control dial . In this case , you cannot adjust the illumination brightness by using the control dial . When the ambient light is dark , you can dim the illumination brightness as described above .
The operational / non-operational setting and sensitivity of the auto dimmer cancel function can be changed by your SUBARU dealer . Contact your SUBARU dealer for details .
3-6 . Warning and Indicator Lights
s03ae
Several of the warning and indicator lights illuminate momentarily and then go out when the ignition switch is initially turned to the “ ON ” position . This permits checking the operation of the bulbs .
Apply the parking brake and turn the ignition switch to the “ ON ” position . For the system check , the following lights illuminate and turn off after several seconds or after the engine has started :
: Seatbelt warning light ( The seatbelt warning light turns off only when the driver fastens the seatbelt .)/ Front passenger ’ s seatbelt warning light ( The seatbelt warning light turns off only when the front seat passenger fastens the seatbelt .)
: Rear seatbelt warning light : SRS airbag system warning light
: Front passenger ’ s frontal airbag ON indicator light
: Front passenger ’ s frontal airbag OFF indicator light
/ : CHECK ENGINE warning light / Malfunction indicator light