134
Child Safety Locks
& Valet Mode s02af06
When you choose the valet mode , the alarm system does not operate . In valet mode , the remote transmitter is used only for locking and unlocking the doors and panic activation .
To enter the valet mode , change the setting of your vehicle ’ s alarm system to deactivation mode . Refer to “ Alarm System Setting ” FP133 . The security indicator light will continue to flash once every 3 seconds , indicating that the system is in the valet mode .
To exit valet mode , change the setting of your vehicle ’ s alarm system to activation mode . Refer to “ Alarm System Setting ” FP133 .
2-7 . Child Safety Locks
WARNING s02ag
Always turn the child safety locks to the “ LOCK ” position when children sit on the rear seat . Serious injury could result if a child accidentally opens the door and falls out .
Each rear door has a child safety lock . When the child safety lock lever is in the “ LOCK ” position , the door cannot be opened from inside . The door can only be opened from the outside .
2-8 . Windows
WARNING s02ah
To avoid serious personal injury caused by entrapment , always conform to the following instructions without exception .
. When operating the power windows , be extremely careful to prevent anyone ’ s body parts or any other objects from being caught in the window .
. Always lock the passengers ’ windows using the lock switch when children are riding in the vehicle .
. Always carry the key when you leave the vehicle for safety reasons and never allow an unattended child to remain in the vehicle . Failure to follow this procedure could result in injury to a child operating the power window .
NOTE
. If the power window system detects resistance , an impact or abnormality , the window operation may be automatically stopped to prevent