132
Alarm System
as the factory setting . A SUBARU dealer can activate the system . Contact your SUBARU dealer for details .
& Arming the System s02af04
The alarm system becomes armed when the following operation is performed .
1 . Close all windows and the moonroof ( if equipped ) and turn the ignition switch to the “ OFF ” position .
2 . Carry the key and get out of the vehicle .
3 . Make sure that the engine hood is locked .
4 . Lock the doors using any of the following methods . . Locking using the remote keyless entry system . For details , refer to “ Remote Keyless Entry System ” FP122 .
. Locking using the keyless access function ( if equipped ). For details , refer to “ Locking with the door lock sensor ” FP112 .
. Locking using the power door locking switch . For details , refer to “ Locking using power door locking switch ” FP128 .
Security indicator light
NOTE
. All doors , the rear gate and fuel filler lid will lock , an electronic chirp will sound once , the hazard warning flashers will flash once , and the security indicator light will start flashing rapidly .
. If any of the doors or the rear gate is not fully closed , an electronic chirp sounds five times and the hazard warning flashers flash five times to alert you that the doors ( or the rear gate ) are not properly closed . When you close the door , doors will automatically lock and the system will automatically arm in 30 seconds .
5 . Approximately 30 seconds later , the system will enter surveillance state .
When the system is in surveillance state , the security indicator light will then flash slowly ( twice approximately every 2 seconds ), indicating that the system has been armed for surveillance .
NOTE
. The system can be armed even if the windows and / or moonroof are open . Always make sure that they are fully closed before arming the system .
. The 30-second standby time can be eliminated if you prefer . Have it performed by your SUBARU dealer .
. If any of the following actions is done during the standby period , the system will not switch to the surveillance state . – Doors ( including the rear gate ) are unlocked using the access key fob / remote transmitter .
– Doors ( including the rear gate ) are unlocked using the keyless access function ( models with “ keyless access with push-button start system ”).
– Any door ( including the engine hood ) is opened .
– The ignition switch is turned to the “ ON ” position ( models with-