494
Replacing Bulbs
2 . Turn the bulb socket counterclockwise and remove it .
& License Plate Light s11be07
1 . Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch . Apply a flat-head screwdriver to the light cover as shown in the illustration , and pry the light cover off from the rear gate trim .
3 . Pull the bulb out of the bulb socket and replace it with a new one .
4 . Install the bulb socket by turning it clockwise .
5 . Install the light cover on the rear gate .
1 . License plate light must be pushed outwards , then pulled out to be removed .