|
7 . Pull the bulb out of the bulb holder and replace it with a new one .
8 . Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks .
9 . Reconnect the electrical connector .
|
|||||
5 . Disconnect the electrical connector . |
10 . Reinstall the rear combination light assembly by sliding the two-pronged part of the combination light assembly securely to each holder of the vehicle side . |
11 . Tighten the upper and lower screws . 12 . Reinstall the side cover .
& Back-Up Light s11be50
NOTE
It may be difficult to replace the bulbs . We recommend that you have the bulbs replaced by your SUBARU dealer if necessary .
|
Maintenance and Service
11
|
||
1 Rear turn signal light |
|||||
6 . Remove the bulb holder from the rear combination light assembly by turning it counterclockwise . |
|||||
– CONTINUED – |