BSD / RCTA 363 |
||||||||
|
may be delayed , or the warning buzzer may be delayed or inoperative , even if there is a vehicle traveling in a neighboring lane or approaching your vehicle from either side .
The driver is responsible for paying attention to the rear and side areas of the vehicle .
|
must obtain certification for the country where you are driving the vehicle . For more information on certification in the U . S . and other FCC compliant countries , including Canada , refer to “ Certification for the BSD / RCTA ” FP369 .
! Blind Spot Detection ( BSD )
s07bm0101
|
RCTA approach indicator light is illuminating , the system warns the driver of dangers by flashing the BSD / RCTA approach indicator light .
! Lane Change Assist ( LCA ) s07bm010101
|
||||||
|
& System Features s07bm01
BSD / RCTA consists of the following functions .
. To detect a vehicle in a blind spot on an adjacent lane or a vehicle approaching at high speed while driving the vehicle ( Blind Spot Detection )
. To detect a vehicle approaching from the right or left while reversing the vehicle ( Rear Cross Traffic Alert )
The system uses radar sensors for the following features .
NOTE
The BSD / RCTA radar sensor has been certified by radio wave-related laws applicable in the U . S . and other FCC compliant countries , including Canada . When driving your vehicle in countries other than the U . S . and Canada , you
|
1 Operating range
The system notifies the driver of the presence of vehicles in its blind spot .
. If the system detects a vehicle in its blind spot , it warns the driver by illuminating the BSD / RCTA approach indicator light ( s ) on the outside mirror ( s ).
. If the driver operates the turn signal lever in the direction where the BSD /
|
1 Operating range
The system notifies the driver of vehicles approaching at a high speed in the neighboring lanes .
. If the system detects a vehicle approaching at a high speed in the neighboring lanes , it warns the driver of dangers by illuminating the BSD / RCTA approach indicator light ( s ) on the outside mirror ( s ).
. If the driver operates the turn signal lever in the direction where the BSD / RCTA approach indicator light is illumi-
– CONTINUED –
|
7
Starting and Operating
|