Manual Climate Control 271 |
|||||||||||||
“ ALL ” mode ( rear seats are occupied by passengers ): |
When the climate control system judges that there are passengers occupying the rear seats , “ ALL ” is displayed on the screen and the system directs the airflow to all vehicle occupants . To cancel the airflow “ ALL ” mode , touch the “ ” icon and “ DRIVER ” or “ FRONT ” is displayed on the screen depending on which passenger ’ s seats are occupied .
NOTE
. Depending on the settings of the climate control system or other factors affecting the temperature inside the vehicle , the operation of the Dynamic Ventilation mode for occupants may differ from the operation
|
displayed on the screen .
. The climate control system judges that the front passenger ’ s seat is occupied by detecting such things as the fastening of the seatbelt , opening or closing of the door , and operation of the passenger ’ s side temperature setting controls .
. If “ FRONT ” is displayed on the screen when the front passenger ’ s door is opened and then closed and the climate control system subsequently judges that the front passenger ’ s seat is not occupied , the screen will display “ DRIVER ” when the vehicle speed reaches approximately 13 mph ( 20 km / h ).
. The climate control system judges that there are passengers occupying the rear seats according to the opening and closing of the rear doors . However , touching “ ” icon will turn off the function that judges whether the rear doors are open or closed . To turn the function on again , turn the ignition switch to the “ OFF ”/“ LOCK ” position for approximately one hour .
. The system may not be able to judge the presence of passengers accurately , in which case this function may not operate properly .
|
& Temperature Control s04aj02
Perform the following operation to regulate the temperature of airflow from the air outlets .
Temperature control buttons :
Press the temperature control button to the blue side ( cool ) or the red side ( warm ).
Temperature control screen ( 11.6-inch display models ):
1 . Touch the climate control mode indicator .
2 . Select the preferred temperature by the following operation . . Touch and move the temperature control bar . . Touch the “ ”/“ ”. . Touch the preferred temperature in the temperature control screen .
|
! Max A / C mode s04aj0208
For quicker cooling , touch “ MAX A / C ” on the climate control mode select icon or customizable icon .
When the Max A / C mode is on , the following settings will be changed automatically .
. The air conditioner will turn on .
. The temperature will be set on the lowest .
|
4
Climate Control
|
||||||||
– CONTINUED – |