Seat , seatbelt and SRS airbags / Seatbelts 1-19
7 . Place the lap belt as low as possible on the hips , not on the waist .
! Unfastening the seatbelt
S01AE060301
4 . After confirming that the webbing is not twisted , insert the anchor tongue plate attached at the webbing end into the buckle on the right-hand side until a click sounds . . If the belt stops before reaching the buckle , return the belt slightly and pull it out more slowly . . If the belt still cannot be unlocked , give it a strong pull and let it retract slightly , then pull it out slowly again .
5 . Insert the center seatbelt tongue plate into the center seatbelt buckle marked “ CENTER ” on the left-hand side until it clicks .
1 ) Button
1 . Push the release button of the center seatbelt buckle ( on the left-hand side ) to unfasten the seatbelt .
NOTE
When the seatback is folded down for greater cargo area , it is necessary to disconnect the connector .
6 . To tighten the lap part , pull up on the shoulder belt .
– CONTINUED –