Maintenance and service / Replacing key battery 11-45
2 . Turn the screw A clockwise or counterclockwise to adjust it .
Remember the direction of the rotation and number of rotations .
3 . Turn screw B the same number of turns and in the same direction as step 2 .
NOTE
. If the headlight aim cannot be adjusted , contact your SUBARU dealer . . To inspect of the headlight aim position , consult a SUBARU dealer .
Replacing key battery
S11BK
The access key fob / transmitter battery may be discharged under the following conditions .
. The operation of the keyless access function is unstable .
. The operating distance of the remote keyless entry system is unstable .
. The transmitter does not operate properly when used within the standard distance .
Replace the battery with a new one .
& Safety precautions CAUTION
S11BK04
. Do not let dust , oil or water get on or in the access key fob / transmitter when replacing battery .
. Before replacing the battery , remove any static electricity .
. Be careful not to touch or damage the printed circuit board in the access key fob / transmitter when replacing the battery .
. Be careful not to allow children to touch the battery and any removed parts ; children could swallow them .
. There is a danger of an explosion if the battery is incorrectly replaced . Replace only with the same or equivalent type of the battery .
. Batteries should not be exposed to excessive heat such as bright sunlight , fire or the like .
NOTE
. Replace only with the same or equivalent type of battery recommended by the manufacturer . . Dispose of used batteries according to local laws . . Mount the battery in the correct orientation to prevent fluid leakage . Be careful not to bend the terminals . It may result in a malfunction . . It is recommended that the battery be replaced by a SUBARU dealer . . Use a new battery . . After replacing the battery , confirm that the transmitter functions properly .
– CONTINUED –