7-80
Starting and operating / Reverse Automatic Braking ( RAB ) system
WARNING
Depress the brake pedal immediately after the system stops the vehicle by automatic braking . Depending on the conditions of the road surface and tires , the vehicle may not remain stopped , possibly leading to an unexpected accident .
! After the vehicle is stopped by the system
S07BN0304
RAB OFF indicator : illuminates when the Reverse Automatic Braking ( RAB ) system is turned OFF .
After the brake pedal is depressed , the RAB OFF indicator will illuminate and the system will temporarily stop operating . The RAB OFF indicator will turn off when the select lever is shifted to a position other than the “ R ” position .
The system will operate again the next time the select lever is shifted to “ R ” position .
NOTE
. Automatic braking only holds the vehicle for 2 seconds . Before the automatic brake is released , a warning sound ( 3 short beeps followed by a long beep ) will activate to alert the driver that the automatic will be released . . The Reverse Automatic Braking ( RAB ) system may stop operating temporarily in the following cases and the RAB OFF indicator will illuminate . – Ice , snow or mud is adhered to the sonar sensors or the rear bumper near the sonar sensor . – Objects are too close to the rear bumper when the select lever is set to the “ R ” position . – The system detects sounds of a similar frequency to the Reverse Automatic Braking ( RAB ) system sonar . – The Vehicle Dynamics Control OFF is selected .
& Canceling the Reverse Automatic Braking ( RAB ) system operation
S07BN04
The Reverse Automatic Braking ( RAB ) system can be temporarily canceled by any of the following operations .
. While the vehicle is stopped by the operation of automatic braking , the brake pedal is depressed .
. While the vehicle is stopped by the operation of automatic braking , the accelerator pedal is depressed .
. The accelerator pedal is kept depressed . ( In this case , limited acceleration will be canceled and the vehicle will continue reversing .)
. The select lever is shifted to a position other than the “ R ” position .
NOTE
The system will be canceled if the object is no longer detected .
& Reverse Automatic Braking ( RAB ) system ON / OFF setting
S07BN05
While the select lever is shifted to the “ R ” position , the below functions of the Reverse Automatic Braking ( RAB ) system can be set by operating the audio / navigation monitor .