3-82
Instruments and controls / Mirrors
Mirrors
S03AP
Always check that the inside and outside mirrors are properly adjusted before you start driving .
& Inside mirror
1 ) |
Normal position |
2 ) |
Anti-glare position |
S03AP01
Push the tab on the mirror for normal use . To reduce glare from the headlights of the vehicle behind you , pull the tab to the antiglare position .
& Auto-dimming mirror / compass ( if equipped )
S03AP02
During nighttime driving , the auto-dimming feature senses distracting glare from vehicle headlights behind you and automatically dims to eliminate the glare and preserve your vision .
! To Operate the Auto-Dimming Feature
S03AP0205
Press the “ ” switch to turn the autodimming feature on / off . The auto-dimming feature is enabled when the switch ’ s green LED indicator is on . The auto-dimming feature will default to on with each ignition cycle .
! To Operate the Compass Feature
S03AP0206
1 . To turn the compass feature on / off , press and hold the “ ” switch for more than 3 seconds or until the display turns on / off . The compass feature will default to on with each ignition cycle .
2 . If the display reads “ C ”, slowly drive the vehicle in circles until compass is calibrated .
Compass calibration zones