Instruments and controls / Multi-function display ( color LCD ) 3-49
Multi-function display ( color LCD ) ( if equipped )
S03BP
NOTE
For models with multi-function display ( black and white ), refer to “ Multi-function display ( black and white )” F3-42 .
WARNING
Always pay adequate attention to safe driving when operating the multi-function display ( color LCD ) while the vehicle is in motion . When operation of the multi-function display ( color LCD ) is disturbing your awareness and ability to concentrate on driving , stop the vehicle in a safe place before performing operations on the screen . Also , do not concentrate on the display while driving . Doing so may cause you to look away from the road and could result in an accident .
& Features
S03BP25
The multi-function display ( color LCD ) has the following functions .
Description Displays useful messages , such as notification , etc .
Displays basic screens ( e . g . fuel consumption screen , etc .)
Sets and adjusts maintenance notification
Page 3-50
3-51
3-64
Also , the multi-function display ( color LCD ) can also be used to set and initialize the multi-function display ( color LCD ) itself .
NOTE
. When the vehicle is in motion , certain functions and selections may not be available . . You can set the language and units for both the multi-function display ( color LCD ) and the combination meter at the same time . For details about setting the language and units , refer to “ Menu screens ” F3-40 . . The images displayed in this Owner ’ s Manual are sample images . The actual image may vary depending on the market and vehicle specifications .
& Welcome screen
S03BP07
When the driver ’ s door is opened and closed , the welcome screen will appear for a short time .
NOTE
. The welcome screen will disappear when the ignition switch is turned to the “ ON ” position while the welcome screen is displayed . . The welcome screen can be set to on or off . For details , refer to “ Screen Settings ” F3-40 . . For a certain period of time after the welcome screen has once appeared , it may not appear again even when the driver ’ s door is opened and closed again . This does not indicate a malfunction .
& Self-check screen
S03BP09
NOTE
When the setting is “ On ”, the selfcheck screen appears . For details about this setting , refer to “ On / Off setting ” F3-64 .
When the ignition switch is turned to the “ ON ” position , the vehicle self-check will be performed . The screens corresponding to the following items will appear one after another for several seconds each .
– CONTINUED –