Instruments and controls / Multi-function display ( black and white ) 3-47 total time in conjunction with the ignition switch .
1 . Press and hold the “+” button located on the side of the information display . The stopped time will then flash .
2 . Within 5 seconds after the stopped time starts flashing , press and hold the “ − ” button located on the side of the information display . The display will then change and after flashing for 3 seconds , the stopped time selected will be displayed .
3 . Each time the “ − ” button is pressed and held during the 3 seconds that the display is flashing , the display will change and flash for 3 seconds . If the “ − ” button is not pressed and held during the 3-second period that the display is flashing , the stopped time selected will be displayed .
! Turn off display of driving information display
S03BO0906
Select the blank space in the menu to exit the driving information display selection .
NOTE
. The average fuel consumption and average vehicle speed are calculated even while the driving information display has been turned off . . Even if you turn off the driving information display , the display will automatically turn on when the battery voltage is disconnected and then reconnected for battery replacement or fuse replacement .
& Outside temperature indicator
S03BO01
1 ) |
U . S . -spec. models |
2 ) |
Except U . S . -spec. models |
NOTE
. The outside temperature indicator shows the temperature around the sensor . However , the temperature may not be indicated correctly or the update may be delayed in the following conditions . – While parking or driving at low speeds – When the outside temperature changes suddenly ( example : when going in and out of an underground parking area or when passing
– CONTINUED –