2-8
Keys and doors / Keyless access with push-button start system
performing the locking procedure , close the opened door or rear gate to lock it . . Within 3 seconds after locking the doors and the rear gate by using the keyless access function , it is not possible to unlock doors and / or the rear gate by using the keyless access function . . When locking , be sure to carry the access key fob to prevent locking the access key fob in the vehicle . . The setting of the hazard warning flasher operation and the volume of the audible signal can be changed by your SUBARU dealer . Contact your SUBARU dealer for details . Also , for models with the combination meter display ( color LCD ), the setting of the hazard warning flasher operation can be changed by operating the combination meter display ( color LCD ). For details , refer to “ Keyless Entry System ” F3-41 .
! Locking with the door lock sensor
S02AP200201
1 ) Door lock sensor
Carry the access key fob , close all doors including the rear gate , and touch the door lock sensor on the door handle . All doors including the rear gate will be locked . Also , an electronic chirp will sound once and the hazard warning flashers will flash once .
! Locking with the rear lock button
S02AP200202
1 ) Rear lock button
Carry the access key fob , close all doors including the rear gate and press the rear lock button . The rear gate and all doors will be locked . Also , an electronic chirp will sound once and the hazard warning flashers will flash once .