2-6
Keys and doors / Keyless access with push-button start system
reregistration of an access key fob , contact a SUBARU dealer . . For a spare access key fob , contact a SUBARU dealer . . Up to 7 access key fobs can be registered for one vehicle . . Do not leave the access key fob in the storage spaces inside the vehicle , such as the door pocket , dashboard , inside the corner of the cargo area . Vibrations may damage the key fob or turn on the switch , possibly resulting in a lockout . . After the vehicle battery is discharged or replaced , initialization of the steering lock system may be required to start the engine . In this case , perform the following procedure to initialize the steering lock . ( 1 ) Turn the push-button ignition switch to the “ OFF ” position . For details , refer to “ Switching power status ” F3-7 . ( 2 ) Open and close the driver ’ s door . ( 3 ) Wait for approximately 10 seconds .
When the steering is locked , the initialization is completed .
. Do not leave the access key fob in the following places .
– On the instrument panel – On the floor – Inside the glove box – Inside the door trim pocket – On the rear seat – In the cargo area
If you do , the following situations may occur . – The access key fob is mistakenly locked inside the vehicle . – A false warning issues although no malfunction actually occurs . – No warning issues even when any malfunction occurs .
& Locking and unlocking by holding the access key fob
S02AP20
When the access key fob is carried within the operating range , the doors and the rear gate can be locked / unlocked just by touching the door handle .
NOTE
The vehicle can also be locked / unlocked with the remote keyless entry system . For details , refer to “ Remote keyless entry system ” F2-17 .
! Operating ranges
S02AP2001
1 ) |
Antennas |
2 ) |
Operating range ( approximately 16 to 32 |
in ( 40 to 80 cm )) |
1 ) LED indicator