Lane Departure Prevention Function
■ Canceling Lane Departure Prevention Function
●Canceling by driver operation
Any of the following operations temporarily cancels the Lane Departure Prevention Function.
While temporarily canceling this function, (Lane Keep Assist indicator) on the EyeSight
display area illuminates in white and the lane indicator turns to gray.
• Depressing the brake pedal strongly
• The Adaptive Cruise Control is activated when Lane Centering Function is set to on in the
customizing functions.
- Control changes to Lane Centering Function.
• Operating the turn signal lever
• The system determines that the driver operates the steering wheel to make a lane
change.
• Turning on the hazard warning flasher switch
●Automatic cancellation by the system
Under the following conditions, a notification will sound 1 short beep and 1 long beep and
the Lane Departure Prevention Function is temporarily canceled.
While the function is temporarily canceled,
(Lane Keep Assist indicator) on the
EyeSight display area illuminates in white and
the lane indicator turns to gray. Also, the Lane
Departure Prevention Function cancellation
message is displayed on the combination
meter display.
• The system does not detect the lane markings.
White
• The windshield wiper operates at a high
S03761
speed.
• The vehicle speed is less than approximately 34 mph (55 km/h) or is more than approximately
93 mph (150 km/h).
• The Vehicle Dynamics Control or the Traction Control Function is activated.
• Either the driver’s door, the front passenger’s door or the rear door is open.
• The driver’s seatbelt is unfastened.
• The select lever is moved to a position other than D , M (models with manual mode) or
L (models with L position).
- Lane Departure Prevention Function can be resumed after the select lever is returned
to the D , M or L position.
87