Instruments and controls/Warning and indicator lights
Inside warning
chime
Ding,
ding ...
(intermittent)
Outside warning
chime
—
Access key
Operation indicawarning indica- tor on push-buttor on meter
ton ignition switch
—
—
3-27
Status
Action
The driver’s door is opened while
the push-button ignition switch is
“ACC” and the select lever is in the
“P” position.
Switch the push-button ignition
switch to “OFF”, or close the driver’s
door.
*When exiting the vehicle, be sure to
switch the push-button ignition
switch to “OFF”.
The push-button ignition switch is
switched to “OFF” while the driver’s Close the driver’s door.
door is open.
—
Lockout warning:
An attempt is made to lock all doors
while the access key is left inside
the vehicle.
Take out the access key from the
vehicle, and lock the doors.
*The doors cannot be locked while
the access key is inside the vehicle.
*A chirp sound will be heard, and all
doors will be unlocked.
Take out the access key from the
vehicle, and lock the doors.
*If the access key is inside the
vehicle, the doors cannot be locked.
Ding
Short beep
(2 seconds)
—
Short beep
(2 seconds)
—
—
Access key lock-in warning:
The door lock sensor is touched
while the push-button ignition switch
is “OFF” and the access key is
inside the vehicle.
—
Beep, beep,
beep, beep,
beep
(5 times)
—
—
Door ajar warning:
The door lock sensor is touched
while the ignition switch is in the
“OFF” position and one of the doors
including the rear gate is opened.
Close the doors securely and lock
them.
*If one of the doors including the rear
gate is opened, the doors cannot be
locked.
—
Power warning:
The door lock sensor is touched
while you are carrying the access
key, the push-button ignition switch
is in a position other than “OFF” and
the select lever is in the “P” position.
Return the access key inside the
vehicle, or switch the push-button
ignition switch to “OFF”.
*If the push-button ignition switch is
not switched to “OFF”, the doors
cannot be locked.
Ding
Long beep (60
seconds max.)
—
—
– CONTINUED –