Subaru Crosstrek Manuals 2017 Crosstrek Owner's Manual | Page 164

3-26 Instruments and controls/Warning and indicator lights The warning chime and the access key warning indicator are used for the following purposes. . Minimizing improper operations when using the keyless access with push-button start system . Helping protect your vehicle from theft When the warning chime sounds and/or the warning indicator flashes, take the appropriate action. WARNING Never drive the vehicle if the indicator on the push-button ignition switch is flashing in green when starting the engine. This indicates the status that the steering wheel is not released and could result in an accident involving serious injury or death. CAUTION . When starting the engine again after the operation indicator on the push-button ignition switch flashes in green, if the operation indicator is still flashing in green, there could be a steering lock malfunction. Contact your SUBARU dealer as soon as possible. . When the operation indicator on the push-button ignition switch flashes in orange, contact a SUBARU dealer immediately. NOTE . Even when the access key is within the operating ranges inside the vehicle, the access key warning for engine start may be provided depending on the status of the access key and the environmental conditions. . When the access key is taken out of the vehicle through an open window, the access key takeout warning or passenger access key takeout warning will not be provided. ! List of warnings CAUTION When any of the following warnings occurs even if the access key warning indicator does not appear, take the appropriate action.