3-8
Instruments and controls/Hazard warning flasher
! Battery drainage prevention function
When the push-button ignition switch is
left in the “ACC” or “ON” position for
approximately 1 hour, the push-button
ignition switch will be automatically
switched to “OFF” to prevent the battery
from going dead. This function is activated
when the select lever is in the “P” position.
Hazard warning flasher
your vehicle under emergency conditions.
The hazard warning flasher works regardless of the position of the ignition switch.
To turn on the hazard warning flasher,
push the hazard warning button on the
instrument panel. All the turn signal lights
and the turn signal indicator lights will
flash. To turn off the flasher, push the
button again.
& When access key does not
operate properly
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
Refer to “Access key – if access key does
not operate properly” F9-17.
Models without multi function display
Models with multi function display
The hazard warning flasher is used to
warn other drivers when you have to park