Subaru Crosstrek Manuals 2017 Crosstrek Owner's Manual | Page 133

Keys and doors/Windows switch up until it clicks and then release it. To stop the window halfway, push the switch down lightly. dow” F2-37. ! Anti-entrapment function NOTE . If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the onetouch auto up/down function will be deactivated. Initialize the power window to reactivate the one-touch auto up/down function. Refer to “Initialization of power window” F2-37. . When the following operations are performed, the power window breaker will operate and it may not be possible to open or close the window. – After the driver’s window is fully closed or fully opened, the switch is continuously operated in the same direction for a few seconds. – After the windows for three or more seats are fully closed or fully opened, each switch is continuously operated in the same direction simultaneously for a few seconds. In this case, after the breaker recovers, be sure to initialize the power windows. If they are not initialized, the one-touch auto up/down function will not operate. Refer to “Initialization of power win- CAUTION . Never attempt to test this function using fingers, hands or other parts of your body. . The anti-entrapment function may not operate properly if some object gets trapped just before the window fully closes. 2-35 While closing the driver’s window automatically, if the window senses a substantial enough object trapped between the window and the window frame, it automatically moves down slightly and stops. NOTE . If a window detects an impact similar to that caused by trapping an object (for example, when the vehicle encounters a deep pothole), the anti-entrapment function may operate. . The window cannot be operated for a few seconds after the anti-entrapment function operates. . If the vehicle’s battery is disconnected due to situations such as battery or fuse replacement, the antientrapment function is deactivated. Initialize the power window to reactivate the anti-entrapment function. Refer to “Initialization of power window” F2-37. – CONTINUED –