9-8
In case of emergency/In case of a flat tire
CAUTION
. Be careful to not allow the hose
to become twisted.
. When connecting the hose, be
careful to not strip the threads on
the application cap.
7. Remove the valve cap from the punctured tire.
4. Use the protrusion on the top of the
cap (5) to make a hole in the aluminum
seal on the sealant (4).
5. Insert the tube (7) with the application
cap (6) into the sealant bottle (4), and then
tighten the sealant application cap (6) until
it clicks.
CAUTION
Be careful not to spill the sealant.
8. Connect the valve fitting (9) on the tip
of the application cap’s rubber hose (8) to
the valve on the damaged tire, and tighten
completely.
CAUTION
6. Connect the compressor hose (2) to
the sealant application cap (6).
The sealant might leak if the fitting is
not tight enough.