Subaru Crosstrek Manuals 2016 Crosstrek Hybrid Owner's Manual | Page 164

Instruments and controls/Warning and indicator lights & Security indicator light This indicator light shows the status of the alarm system. It also indicates operation of the immobilizer system. ! Alarm system It blinks to show the driver the operational status of the alarm system. For detailed information, refer to “Alarm system” F221. ! Immobilizer system The security indicator light starts blinking in the following conditions. . Immediately after the push-button ignition switch is turned to the “OFF” position. . Immediately after the driver’s door is opened or closed when all of the following conditions are met. – The push-button ignition switch is in the “ON” or “ACC” position. – The access key is outside the vehicle. – The engine is not running. If the indicator light does not blink in the above conditions, it may indicate that immobilizer system may be malfunctioning. Contact your nearest SUBARU dealer immediately. switch is pressed to turn it on or to start the hybrid system carrying an unauthorized key (for example, the key is unregistered or the ID code does not match), the power is not switched to “ON” and the security indicator light continues blinking. 3-27 & Select lever/gear position indicator NOTE . The security indicator light remains off in the following conditions. This is normal and does not indicate a malfunction. – while the hybrid system is running – the push-button ignition switch has been turned to the “ON” or “ACC” position and the driver’s door has not been opened or closed . Even if the security indicator light blinks irregularly or its fuse blows (the light does not blink if its fuse is blown), the immobilizer system will function normally. 1) 2) Upshift indicator Downshift indicator This indicator shows the position of the select lever. When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the upshift/ downshift indicator light up. Refer to “Continuously variable transmission” F714. In the event that the push-button ignition – CONTINUED –