Subaru Crosstrek Manuals 2016 Crosstrek Hybrid Owner's Manual | Seite 163

3-26 Instruments and controls/Warning and indicator lights Inside warning chime Long beep (continuous) Outside warning chime — Access key warning indicator on meter — Operation indicator on push-button ignition switch Status Action — Select lever position warning: The hybrid system is turned off by pressing the push-button ignition switch and the select lever is in a position other than the “P” position. Start the engine, shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. Replace the battery of the access key. Long beep (continuous) — — — Select lever position warning: The driver’s door was opened while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Ding — — — The battery of the access key is low. Ding — — Steering lock warning: Flashes in green The hybrid system start procedure (15 seconds max.) was performed, but the steering is still locked. While turning the steering wheel right and left lightly, depress the brake pedal and press the pushbutton ignition switch. Ding — — System malfunction warning: Flashes in orange A malfunction was detected in the power system or steering lock. Contact a SUBARU dealer immediately and have the vehicle inspected. NOTE An electronic chirp will sound while the select lever is in the “R” position. In this case, the select lever position warning chime will not sound.