Instruments and controls/Meters and gauges
3-7
& Speedometer
To change the setting:
1. Turn the ignition switch to the “OFF” or
“ACC” position.
The speedometer shows the vehicle
speed.
& Odometer
2. Press the trip knob to show “
” or
“
” on the odometer and trip meter
display. The display can be switched as
shown in the following illustration by
pressing the trip knob.
*1: They cannot be displayed when the
ignition switch is in the “ON” position.
*2: Displayed only for models with BSD/
RCTA.
3. To change the current setting, press
the trip knob for at least 2 seconds.
: Activated
: Deactivated
NOTE
The initial illumination setting of the
meter/gauge needles of your vehicle
has been set for activation “
” at the
time of shipment from the factory.
1)
Trip knob
This meter displays the odometer when
the ignition switch is in the “ON” position.
The odometer shows the total distance
that the vehicle has been driven.
If you press the trip knob when the ignition
switch is in the “OFF” or “ACC” position,
the odometer/trip meter will light up. If you
do not press the trip knob within 10
seconds of illumination of the odometer/
trip meter, the odometer/trip meter will turn
off.
– CONTINUED –