BRZ _ U. book 365 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
11-22. Alloy Wheels Alloy wheels can be scratched and damaged easily. Handle them carefully to maintain their appearance, performance, and safety.
� When any of the wheels is removed and replaced for tire rotation or to change a flat, always check the tightness of the wheel nuts after driving approximately 600 miles( 1,000 km). If any nut is loose, tighten it to the specified torque.
� Never apply oil to the threaded parts, wheel nuts, or tapered surface of the wheel.
� Never let the wheel rub against sharp protrusions or curbs.
� When wheel nuts, balance weights, or the center cap is replaced, be sure to replace them with genuine SUBARU parts designed for alloy wheels.
11-23. Windshield Washer Fluid 1)“ LOW” position
The washer fluid level can be checked by observing the position of the level on the liquid-covered holes in the gauge. � If the level falls below the second hole from the bottom( the“ LOW” position), add washer fluid.
Use windshield washer fluid. If windshield washer fluid is unavailable use clean water.
In areas where water freezes in winter, use an anti-freeze type windshield washer fluid.
1 B02110