BRZ _ U. book 364 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
364
Tires and Wheels 11. Put on the new tire. Replace the wheel nuts. Tighten them by hand.
WARNING Do not use oil or grease on the wheel studs or nuts when the new tire is installed. This could cause the nuts to become loose and lead to an accident.
12. Turn the jack handle counterclockwise to lower the vehicle.
1
4
3
2
13. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration.
For the wheel nut tightening torque, refer to " Tires " �P383. Never use your foot on the wheel nut wrench or a pipe extension
5
600192 on the wrench because you may exceed the specified torque. Have the wheel nut torque checked at the nearest automotive service facility. 14. Store the jack, jack handle and wheel nut wrench in their storage locations.
WARNING
Never place the tire to be replaced or tire changing tools in the passenger compartment after changing a new tire. In a sudden stop or collisions, loose equipment could strike occupants and cause injury. Store the all tools in the proper place.
■ Wheel Replacement
When replacing wheels due, for example, to damage, make sure the replacement wheels match the specifications of the wheels that are fitted as standard equipment. Replacement wheels are available from SUBARU dealers.
N
W a c ti in k s