BRZ _ U. book 281 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
Reverse Automat- The rear bumper is exposed to strong impact, or the rear bumper is deformed. � On a steep hill, the system’ s automatic braking ability will be reduced. � The system is designed to avoid collisions by automatic hard braking when the vehicle’ s reversing speed is less than approximately 3 mph( 5 km / h). However, the system does not guarantee that the vehicle will be able to avoid collisions in any situation. � If the vehicle is reversed at an extremely slow speed, the driver’ s operation may be prioritized. In this case, automatic braking will not operate. � In the following situations, the system may not be able to detect an object correctly:- When the vehicle is approaching diagonally to an object- When the steering wheel is turned greatly � The system may not be able to detect and apply the brake with the following objects.- Sharp or thin objects such as poles, fences and ropes which may not reflect the sound wave emitted from the sonar sensor.
- Objects that are too close to the rear bumper when the select lever is set to the“ R” position.- Objects with a surface which may not reflect the sound wave emitted from the sonar sensor such as a chain link fence. � Objects the system is not designed to detect and apply brake.- Pedestrians.- Moving objects including moving vehicles.- Objects which absorbs sound waves such as cloth or snow.- Objects whose surface has a diagonal angle.- Objects that are low to the ground such as parking blocks.- Objects that are high above the ground such as objects hanging from above.- Objects that are out of range of the center of the vehicle in the horizontal direction.- Objects that are not perpendicular to the ground.- The surface of the object is uneven or wavy. � When reversing the vehicle, the functions may not be able to work properly or may cause a system malfunction if the following conditions exist.