BRZ _ U. book 239 ページ 2024 年 6 月 14 日 金曜日 午前 9 時 14 分
shift to the normal timing after the engine has warmed up. � Immediately after transmission fluid is replaced, you may feel that the transmission operation is somewhat unusual. This results from invalidation of data which the on-board computer has collected and stored in memory to allow the transmission to shift at the most appropriate times for the current condition of your vehicle. Optimized shifting will be restored as the vehicle continues to be driven for a while. � Place the shift boot to the original position after it is lifted. If the shift lever is operated with the shift boot in the rolled up position, the shift boot may have tension and it may disturb the shift lever operation. � When the vehicle is idling at high rpm in order to warm up, and the vehicle is on a slippery road, the transmission may automatically shift to 2nd gear for stopping and starting off.
■ Select Lever
702768
: Shift with the brake pedal depressed and push-button ignition switch in the“ ON” position. When shifting between“ P” and“ D”, depress the brake pedal and securely stop the vehicle before shifting.
The select lever has four positions,“ P”,“ R”,“ N”,“ D” and also has a manual gate for using the manual mode.
NOTE
To protect the engine while the select lever is in the“ P” or“ N” position, the engine is controlled so that the engine speed may not become too high even if the accelerator pedal is depressed hard.